Banana Pi BPI-M2 Ultra SBC Single Board Computer

Banana Pi BPI-M2 Ultra is a quad-core mini single-board computer built with Allwinner A40i/R40/V40 SoC. It features 2GB of RAM and 8GB eMMC. It also has onboard WiFi and BT. On the ports side, the BPI-M2 Ultra has 2 USB A 2.0 ports, 1 USB OTG port, 1 HDMI port, 1 audio jack, a DC power port, and last but not least, a SATA port. Also being a member of the Banana Pi family, the M2 Ultra is a direct upgrade from the Banana Pi M1/M1+ that supports SATA from the SoC. The SATA performance on the R40 is fitting for media-related projects such as storage servers. Backed by our community, starting a project and building servers is fun and rewarding. We welcome all companies, DIYers, and tech-loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project.

Allwinner A40i/R40/V40 Quad Core ARM Cortex A7 CPU

2GB DDR3 SDRAM

8GB eMMC flash onboard

WiFi (AP6212) & BT onboard

SATA Interface

2*USB 2.0

MIPI DSI interface

CSI camera interface

Hardware Specification of Banana pi BPI-M2 Ultra

Soc Allwinner A40i/R40/V40

CPU quad-core cortex -A7, the most power-efficient CPU core ARM's ever development

GPU dual-core MALI-400 MP2 runs at 500MHz, capable of 1.1 Gpixel/s throughput. Graphics capabilities are slightly higher than the original Xbox’s level of performance. The GPU provides OpenGL ES 2.0, hardware-accelerated OpenVG, 1080p45 H.264 high-profile encode and decode.

SDRAM 2 GB DDR3 with 733MHz\(shared with GPU\)

SATA suppoort SATA interface

GPIO 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, and I2S.

On board Network 10/100/1000Mbps Ethernet \(Realtek RTL8211E/D\)

Wifi Module WiFi 802.11 b/g/n \(AP 6212 module on board\)

Bluetooth BT4.0

On board Storage MicroSD \(TF\) card,8GB eMMC onboard

Display 4-lane MIPI DSI display, RGB panel or LVDS panel, TV-out on HDMI V1.4

Video Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 decodes up to 1080P60, supports video encoding: High-deinition\(HD\)H.264 video encoder is up to 1080P@45fps

Audio outputs HDMI, analog audio \(via 3.5 mm TRRS jack\)

Camera A CSI input connector Camera: Supports 8-bit YUV422 CMOS sensor interface, Supports CCIR656 protocol for NTSC and PAL, Supports 5M pixel camera sensor, Supports video capture solution up to 1080p@30fps

Audio input On board microphone

USB 2 USB 2.0 host, 1 USB 2.0 OTG

Buttons Reset button, Power button, U-boot button

Leds Power status Led and RJ45 Led

IR onboard IR receiver

DC Power 5V/2A with DC port

battery 3.7V lithium battery power support

Sizes 85mmX56mm, the same size as Raspberry Pi 3

Weight 40g