Banana Pi BPI-M2M SBC Single Board Computer


  • Brand: Banana PI
  • Product Code: bpi-m2m-a33
  • Availability: In Stock

  • 2 or more $23.68
  • 4 or more $22.72

Tags: banana, pi, bpi-m2m, sbc, single, board, computer, bpi-m2m-a33, sbc, boards

Banana PI BPI-M2 Magic (BPi-M2M) is an efficient quad-core solution designed for internet-of-things applications, Use Allwinner R16 chip design, also can use Allwinner A33 chip on board, which outperforms competitors in terms of its system performance, scalability, and energy-efficiency; it can be used for home entertainment, home automation, and high wireless performance and so on.

BPI-M2 Magic integrates four ARM Cortex-A7 CPU cores and Mali400MP2 graphics architecture, It also includes a variety of peripherals, BPI-M2 Magic with 512M DDR3,including 4 lane-MIPI DSI, LVDS, USB2.0 OTG/HOST,802.11 b/g/n wifi & BT4.0 onboard.

Note: 1, BPI-M2 Magic not HDMI interface. 2, Not support RJ45 interface

BPI-M2 Magic can run with Android smoothly, it also can run Debian, Ubuntu Linux, Raspberry Pi image, and other OS. It can easily run with the game it supports 1080P high definition video output, the GPIO compatible with Raspberry Pi B+ and can run the ROM Image

Allwinner R16 chip and A33 chip is PIN to PIN compatibility, so BPI-M2 Magic just replace R16, A33 chip onboard, easy to the DIY new product.

Key Features

  • Allwinner A33 Quad Core ARM Cortex A7 CPU.
  • 512MB DDR3 SDRAM.
  • WiFi (AP6212) & Bluetooth onboard.
  • 8G eMMC flash
  • CSI camera interface
  • DSI display interface

Hardware spec

Banana Pi M2 Magic
CPUAllwinner R16 ARM Cortex-A7 Quad-Core
GPUPowerVR SGX544MP1 Comply with OpenGL ES 2.0 OpenCL 1x, DX9_3
Memory512MB LPDDR3 (shared with GPU)
StorageOn Board 8GB eMMC Flash, Micro SD-Card slot.
NetworkWi-Fi 802.11 b/g/n (AP6212) + Bluetooth BT4.0
Video-Input(s)A CSI input connector allows for the connection of a designed camera module
Video Output(s)MIPI Display Serial Interface (DSI) for raw LCD Panel
Audio Input(s)Onboard microphone
Audio Output(s)3.5mm jack
USB portsUSB 2.0 PORT (x1), USB OTG (x1)
RemoteNot IR Receiver
GPIO40 Pin Header: GPIO (x28) and Power (+5V, +3.3V, and GND). Some of I/O Pin can be used for specific functions like UART, I2C, SPI, or PWM
SwitchesReset, Power and U-boot
LEDPower Status and 8P8C
Power Source5 volt @2A via DC Power and/or Micro USB (OTG)
Size & Weight51x51mm, 48g
OSAndroid and Linux

Write a review

Note: HTML is not translated!
    Bad           Good