Banana Pi BPI-P2 Pro SBC, Banana Pi P2 Pro Single Board Computer

Banana Pi BPI-P2 pro（Armsom Pro） is a development board based on the RK3308B-S chip. With a high-performance 4-core ARM Cortex-A35 processor, 512M RAM(16bit DDR2/DDR3/DDR3L/LPDDR2). and 8G eMMC onboard, support PoE function. The chip has a wealth of interfaces, such as I2S, PCM, TDM, I2C, UART, SPDIF, HDMI ARC, etc., to meet the application of different products. RK3308 has a rich voice interface, its own eight ADC interface, multi-channel I2S, and multi-channel PDM interface. This not only provides customers with a wealth of interface choices but also can reduce the hardware design difficulty and hardware design cost of products.

Banana Pi BPI-P2 Pro has 512MB DDR3 memory size, operating system, and storage that can use an SD card or EMMc. BPI-P2 Pro is available as an onboard storage version with 1Gb/2Gb/4Gb/8Gb NAND flash

Maker DIY

IoT Smart Internet of Things

Intelligent speech recognition

Man-machine interface

Industrial control

Intelligent robot

Key Features

CPU: 64bits Quad-core Arm Cortex-A35 Rockchip RK3308B-S

512 DDR3 SDRAM

8G eMMC flash onboard

WiFi&BT: 802.11 a/b/g/n/ac & BT5.0 (AP6256)

40 PIN GPIO, including UART, SPI, I2C, IO, etc

100M LAN

IEEE 802.3af PoE standard PoE module support

Audio: Supports rich audio interfaces, such as MIC/PDM/SPDIF/I2S

Banana Pi BPI-P2 pro

SOC RockChip RK3308B-S

CPU Quad-core ARM Cortex-A35

GPU none

ROM 512MB

RAM 8GB eMMC

TF Card TF card (Max 64GB)

Network 100M LAN

PoE power PoE function support， Output Voltage 5V, Output Power 10W

WiFi AP6256

Audio Output With built-in audio CODEC, including ADC×8 and DAC×2

Power Source TYPE C 5V/2A or PoE power

USB 1xUSB 2.0

1xType-C

Others Fan, RTC, LED, Debugging

Button Power Button、Reset Button、 Recovery Button、Root Button

Low-level peripherals 40 Pin + 12 Pin

uart GPIO\(1x3\) pin UART, ground

LED Power led & Status led

Product size 65mm X 52.5mm

Weight 30g