Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with VTERAS!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Tags: Banana Pi S3 Centi, BPI-Centi-S3 ESP32-S3 Development Board, bpi-s3-centi, SBC Boards
Banana Pi S3 Centi, BPI-Centi-S3 ESP32-S3 Development Board
Banana Pi S3 Centi, BPI-Centi-S3 ESP32-S3
Introduction
BPI-UNO32 with ESP32 design
BPI-Centi-S3 is a small-sized ESP32-S3 development board with a 1.9-inch LCD onboard, suitable for the development of comprehensive Internet of Things application projects such as color display, interactive control, wireless communication, and sensor data acquisition.
Using the Espressif ESP32-S3 chip, it supports 2.4 GHz Wi-Fi and Bluetooth® Low Energy (Bluetooth® LE) dual-mode wireless communication.
In a compact space, it still provides an incremental rotary encoder, a buzzer, a WS2812 color LED, and all other available pins to meet diverse needs.
Support USB and external 3.7V lithium battery power supply, can realize automatic switching power supply function under the dual power supply, and support USB charging mode, equipped with battery voltage detection circuit, convenient for power management.
Key Features
ESP32-S3, Xtensa® 32 bit LX7
2M PSRAM, 8M FLASH
2.4G WIFI, Bluetooth 5, Bluetooth mesh
GPIO, PWM, I2C, SPI, RMT, I2S, UART, USB, JTAG
1 * ST7789 TFT LCD, 1.9-inch, 170*320 resolution, 8bit 8080 parallel port
1 * Rotary Encoder
1 * Buzzer
1 * Neopixel LED
1 * SH 1mm 4-Pin I2C connector
2 * SH 1mm 6-Pin
1 * USB Type-C
1 * MX 1.25mm 2-Pin battery connector, support charging
2 * M3 Screw Holes
Hardware Specifications
BPI-Centi-S3 Spec
SoC: ESP32-S3, Xtensa® 32-bit LX7 dual-core processor
Clock Frequency: 240MHz MAX
Internal ROM: 384 KB
Internal SRAM: 320 KB
Onboard FLASH ROM: 8MB
On-chip PSRAM: 2MB
WIFI: IEEE 802.11 b/g/n, 2.4Ghz frequency band, 150Mbps
Bluetooth: Bluetooth 5, Bluetooth mesh
External crystal oscillator: 40Mhz
RTC and LowPower Management: Power Management Unit (PMU) + Ultra-Low-Power Coprocessor(ULP)
GPIO: 9 available GPIOs have been exported to the JST SH socket
Support Peripherals: I2C, SPI, PWM, UART, RMT, I2S, SD
JST SH 1mm socket: 1 * 4Pin, 2 * 6Pin
USB: 1 * Full Speed USB 2.0 OTG, Type-C Female
USB Serial/JTAG Controller: 1, USB full speed standard, CDC-ACM, JTAG
TFT LCD size: 1.9 inches
TFT LCD resolution: 170 * 320 RGB
TFT LCD control chip: ST7789V3
TFT LCD interface: 8bit 8080 parallel port
Encoder 1 * Incremental Rotary Encoder, support pressing function
Buzzer 1
Color LED: 1 * WS2812 2020 LED
Button: RST Button, BOOT Button
Screw Holes: 2 * M3 Screw Holes
Machine working temperature: -20℃ ~ +60℃
Working voltage: 3.3V
USB input voltage: 3.3V~5.5V
Maximum discharge current: [email protected] DC/DC
Battery connector: MX 1.25mm 2-Pin
USB charging: Support
Maximum charging current: 500mA
Banana Pi S3 Centi, BPI-Centi-S3 ESP32-S3
Introduction
BPI-UNO32 with ESP32 design
BPI-Centi-S3 is a small-sized ESP32-S3 development board with a 1.9-inch LCD onboard, suitable for the development of comprehensive Internet of Things application projects such as color display, interactive control, wireless communication, and sensor data acquisition.
Using the Espressif ESP32-S3 chip, it supports 2.4 GHz Wi-Fi and Bluetooth® Low Energy (Bluetooth® LE) dual-mode wireless communication.
In a compact space, it still provides an incremental rotary encoder, a buzzer, a WS2812 color LED, and all other available pins to meet diverse needs.
Support USB and external 3.7V lithium battery power supply, can realize automatic switching power supply function under the dual power supply, and support USB charging mode, equipped with battery voltage detection circuit, convenient for power management.
Key Features
ESP32-S3, Xtensa® 32 bit LX7
2M PSRAM, 8M FLASH
2.4G WIFI, Bluetooth 5, Bluetooth mesh
GPIO, PWM, I2C, SPI, RMT, I2S, UART, USB, JTAG
1 * ST7789 TFT LCD, 1.9-inch, 170*320 resolution, 8bit 8080 parallel port
1 * Rotary Encoder
1 * Buzzer
1 * Neopixel LED
1 * SH 1mm 4-Pin I2C connector
2 * SH 1mm 6-Pin
1 * USB Type-C
1 * MX 1.25mm 2-Pin battery connector, support charging
2 * M3 Screw Holes
Hardware Specifications
BPI-Centi-S3 Spec
SoC: ESP32-S3, Xtensa® 32-bit LX7 dual-core processor
Clock Frequency: 240MHz MAX
Internal ROM: 384 KB
Internal SRAM: 320 KB
Onboard FLASH ROM: 8MB
On-chip PSRAM: 2MB
WIFI: IEEE 802.11 b/g/n, 2.4Ghz frequency band, 150Mbps
Bluetooth: Bluetooth 5, Bluetooth mesh
External crystal oscillator: 40Mhz
RTC and LowPower Management: Power Management Unit (PMU) + Ultra-Low-Power Coprocessor(ULP)
GPIO: 9 available GPIOs have been exported to the JST SH socket
Support Peripherals: I2C, SPI, PWM, UART, RMT, I2S, SD
JST SH 1mm socket: 1 * 4Pin, 2 * 6Pin
USB: 1 * Full Speed USB 2.0 OTG, Type-C Female
USB Serial/JTAG Controller: 1, USB full speed standard, CDC-ACM, JTAG
TFT LCD size: 1.9 inches
TFT LCD resolution: 170 * 320 RGB
TFT LCD control chip: ST7789V3
TFT LCD interface: 8bit 8080 parallel port
Encoder 1 * Incremental Rotary Encoder, support pressing function
Buzzer 1
Color LED: 1 * WS2812 2020 LED
Button: RST Button, BOOT Button
Screw Holes: 2 * M3 Screw Holes
Machine working temperature: -20℃ ~ +60℃
Working voltage: 3.3V
USB input voltage: 3.3V~5.5V
Maximum discharge current: [email protected] DC/DC
Battery connector: MX 1.25mm 2-Pin
USB charging: Support
Maximum charging current: 500mA
