Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with VTERAS!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Tags: orange, pi, pc2, h5, 1gb, ddr3, quad-core, 64-bit, cortex-a53, open-source, single-board, computer, run, android, 5, 1, ubuntu, debian, image, opi, pc2, board, orange-pi-pc-plus, sbc, boards
Orange Pi PC2 H5 1GB DDR3 Quad-Core 64-bit Cortex-A53 Open-Source Single-Board Computer, Run Android 5.1, Ubuntu, Debian Image OPI PC2 Board
About this item
It’s an open-source single-board computer. It can run Android 5.1, Ubuntu, Debian Image. It uses the AllWinner H5 SoC, and has 1GB DDR3 SDRAM
Memory (SDRAM): 1GB DDR3 (shared with GPU)
40 Pins Header, 3*USB 2.0 HOST, 1*USB 2.0 OTG,1*1000M Ethernet RJ45, 1*3.5 mm Jack, 1*HDMI, 1*MIC, 1* Camera Interface,1*TF card slot
Product description
Model: OPI PC2 Board
CPU: H5 High-Performance Quad-core 64-bit Cortex-A53. An integrated multimedia acceleration engine. Hardware Java acceleration. Integrated hardware floating-point coprocessor
GPU: Full scene over-sampled 4X anti-aliasing engine with no additional bandwidth usage. High-Performance Hexa-core Mali450. OpenGL ES 2.0/1.1/1.0, OpenVG 1.1, EGL. 40 GFlops, Pixel fill rate greater than 2.7GPixel/s
Memory (SDRAM): 1GB DDR3 (shared with GPU)
Onboard Storage: TF card (Max. 32GB) / NOR flash(2MB)
Onboard Network: 1000M/100M Ethernet RJ45
Video-Input: A CSI input connector Camera: Supports 8-bit YUV422 CMOS sensor interface. Supports CCIR656 protocol for NTSC and PAL. Supports SM pixel camera sensor. Supports video capture solution up to 1080p@30fps
Audio Input: MIC
Video Outputs: Supports HDMI output with HDCP. Supports HDMI CEC. Supports HDMI 30 function. Integrated CVBS. Supports simultaneous output of HDMI and CVBS. Audio Output: 3.5 mm Jack and HDMI
Power Source: DC input can supply power, but USB OTG input don’t supply power
USB 2.0 Ports: Three USB 2.0 HOST, one USB 2.0 OTG
Buttons: Power Button(SW4)
Low-level peripherals: 40 Pins Header
GPIO(1x3) pin: UART, ground.
LED: Power led & Status led
Key: IR input, POWER
Supported OS: Android, Ubuntu, Debian
About this item
It’s an open-source single-board computer. It can run Android 5.1, Ubuntu, Debian Image. It uses the AllWinner H5 SoC, and has 1GB DDR3 SDRAM
Memory (SDRAM): 1GB DDR3 (shared with GPU)
40 Pins Header, 3*USB 2.0 HOST, 1*USB 2.0 OTG,1*1000M Ethernet RJ45, 1*3.5 mm Jack, 1*HDMI, 1*MIC, 1* Camera Interface,1*TF card slot
Product description
Model: OPI PC2 Board
CPU: H5 High-Performance Quad-core 64-bit Cortex-A53. An integrated multimedia acceleration engine. Hardware Java acceleration. Integrated hardware floating-point coprocessor
GPU: Full scene over-sampled 4X anti-aliasing engine with no additional bandwidth usage. High-Performance Hexa-core Mali450. OpenGL ES 2.0/1.1/1.0, OpenVG 1.1, EGL. 40 GFlops, Pixel fill rate greater than 2.7GPixel/s
Memory (SDRAM): 1GB DDR3 (shared with GPU)
Onboard Storage: TF card (Max. 32GB) / NOR flash(2MB)
Onboard Network: 1000M/100M Ethernet RJ45
Video-Input: A CSI input connector Camera: Supports 8-bit YUV422 CMOS sensor interface. Supports CCIR656 protocol for NTSC and PAL. Supports SM pixel camera sensor. Supports video capture solution up to 1080p@30fps
Audio Input: MIC
Video Outputs: Supports HDMI output with HDCP. Supports HDMI CEC. Supports HDMI 30 function. Integrated CVBS. Supports simultaneous output of HDMI and CVBS. Audio Output: 3.5 mm Jack and HDMI
Power Source: DC input can supply power, but USB OTG input don’t supply power
USB 2.0 Ports: Three USB 2.0 HOST, one USB 2.0 OTG
Buttons: Power Button(SW4)
Low-level peripherals: 40 Pins Header
GPIO(1x3) pin: UART, ground.
LED: Power led & Status led
Key: IR input, POWER
Supported OS: Android, Ubuntu, Debian
