Sipeed Tang Nano 9K FPGA Development Board Gowin GW1NR-9 RISC-V HDMI Tang Nano 9k
$17.78
- Brand: Sipeed
- Product Code: sipeed-tang-nano-9k
- Availability: In Stock
-
- 2 or more $16.38
- 4 or more $15.40
Sipeed Tang Nano 9K FPGA Development Board Gowin GW1NR-9 RISC-V HDMI Tang Nano 9k
The Tang Nano 9K, powered by Gowin's GW1NR-9 FPGA chip, is a versatile and feature-rich development board. It features several often used connectors, including HDMI, RGB screen, and SPI screen interfaces, as well as a 32Mbit SPI flash and six LEDs. It has 8640 LUT4 logic units, an onboard 27MHz clock, and 2 PLLs meaning, as well as basic FPGA designs, it can also be used for full risc-v softcore such as PicoRV.
Tang Nano 9K is the 5th product of the Sipeed Tang series. Several Tang FPGA products are compared in the table below, if you need a more feature-rich board consider the Tang Nano 20K.
Specifications
In-depth specifications of the tang nano 9k.
Item value
Logic units(LUT4) 8640
Registers(FF) 6480
ShadowSRAM SSRAM(bits) 17280
Block SRAM BSRAM(bits) 468K
Number of B-SRAM 26
User flash(bits) 608K
SDR SDRAM(bits) 64M
18 x 18 Multiplier 20
SPI FLASH 32M-bit
Number of PLL 2
Display interface HDMI interface, SPI screen interface, and RGB screen interface
Debugger Onboard BL702 chip provides USB-JTAG and USB-UART functions for GW1NR-9
IO • support 4mA、8mA、16mA、24mA other driving capabilities • Provides independent Bus Keeper, pull-up/pull-down resistors, and Open Drain output options for each I/O
Connector TF card slot, 2x24P 2.54mm Header pads
Button 2 programmable buttons for users
LED Onboard 6 programmable LEDs
